House Plan TOH-3663

A below grade (full in-ground) unfinished basement foundation constructed with 8" or 12" reinforced concreate block walls with a 4" poured concrete slab as the basement floor. Pipe columns support the beams and are placed under load bearing walls. The basement square footage is typically the same as the main floor.

An above grade foundation with block and masonry on the exterior with wood beams and concrete block for interior support completed by wood floor joists. This foundation does not require a level building site.

This foundation requires a level building pad. It consists of 4" thick poured concrete with interior footings placed under load bearing walls. A slab foundation can be built at normal grade or to give the home a raised look use reinforced concrete blocks with compacted fill dirt then the standard 4" poured concrete. The majority of our designs include details for this type of slab construction.

 

Additional sets may be ordered within 90 days of your initial purchase.

Provides information regarding the quantity and sizes of materials necessary for the construction of the home. It does not include finishing materials such as plumbing fixtures, electrical fixtures, heating and air conditioning, interior finish, etc. The materials list offers a convenient way to make a rough determination of the cost of materials involved. Due to the variance in building practices, it is strongly suggested the builder review and adjust any materials prior to construction.

Modify plan from 2x4 to 2x6 wall construction. This change will result in a more energy efficient home. NOTE: The 2" will be taken to the inside with this conversion. If an alternate option is preferred, a consultation with the modification group will be required. Please contact us at 1-866-214-2242 Shipping can be delayed approximately 3-4 days with this option. Materials list purchases (if available) with this option will not reflect the 2x6 conversion.